toshiba satellite a505 inventec chelsea 10mg cs10mg 6050a2251001 schematic
toshiba satellite a505=1=inventec chelsea 10mg cs10mg 6050a2251001.pdf
Technical Specifications
Technical Summary
The Inventec Chelsea 10MG motherboard, documented under board number 6050A2250-0-M, is a Penryn Socket P platform paired with the ICH9-M southbridge and Cantiga integrated graphics. The system memory architecture is DDR2, supported by two DIMM slots (DDR2 DIMM0 and DDR2 DIMM1). The embedded controller is a Winbond KBC, and the audio subsystem is managed by a Realtek ALC272 codec. Power management and charging are handled by a TI BQ24721C QFN-32P charger IC. The board integrates a Realtek RTL8111 LAN controller, a Ricoh R5U230 card reader, and a Realtek WLAN module. The HDMI interface is supported via a dedicated connector and CIR circuitry. The schematic revision is dated 19-Feb-2009.
Technician FAQ
Q: What is the board number for this Inventec Chelsea 10MG motherboard?
A: The board number is 6050A2250-0-M.
Q: What CPU platform and socket does this motherboard use?
A: The CPU platform is Penryn, and the socket is Socket P.
Q: What is the charging IC used on this motherboard?
A: The charging IC is a TI BQ24721C in a QFN-32 package.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC272.
Q: What is the embedded controller (EC/KBC) on this motherboard?
A: The embedded controller is a Winbond KBC.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
toshiba satellite a505=1=inventec chelsea 10mg cs10mg 6050a2251001.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INVENTEC |
| Model | Chelsea 10MG |
| Motherboard Manufacturer | INVENTEC |
| Project Code | Chelsea 10MG |
| Board Number | 6050A2250-0-M |
| Revision | REV |
| Date | 19-Feb-2009 |
| CPU Platform | Penryn |
| CPU Socket | Socket P |
| PCH / Southbridge | ICH9-M |
| GPU Type | Cantiga |
| Graphics Architecture | Cantiga |
| EC / KBC | WINBOND |
| Audio Codec | ALC 272 |
| Charging IC | TI_BQ24721C_QFN_32P |
| Charger Architecture | System Charger & |
| RAM Type | DDR2 |
| RAM Architecture | DDR2 Interface |
| RAM Quantity / Slots | DDR2 DIMM0, DDR2 DIMM1 |
| Card Reader IC | RICOH_R5U230 |
| LAN IC | Realtek RTL8111 |
| WiFi / WLAN IC | Realtek |
| HDMI Level Shifter | HDMI CONN & CIR |
Technical Summary
The Inventec Chelsea 10MG motherboard, documented under board number 6050A2250-0-M, is a Penryn Socket P platform paired with the ICH9-M southbridge and Cantiga integrated graphics. The system memory architecture is DDR2, supported by two DIMM slots (DDR2 DIMM0 and DDR2 DIMM1). The embedded controller is a Winbond KBC, and the audio subsystem is managed by a Realtek ALC272 codec. Power management and charging are handled by a TI BQ24721C QFN-32P charger IC. The board integrates a Realtek RTL8111 LAN controller, a Ricoh R5U230 card reader, and a Realtek WLAN module. The HDMI interface is supported via a dedicated connector and CIR circuitry. The schematic revision is dated 19-Feb-2009.
Technician FAQ
Q: What is the board number for this Inventec Chelsea 10MG motherboard?
A: The board number is 6050A2250-0-M.
Q: What CPU platform and socket does this motherboard use?
A: The CPU platform is Penryn, and the socket is Socket P.
Q: What is the charging IC used on this motherboard?
A: The charging IC is a TI BQ24721C in a QFN-32 package.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC272.
Q: What is the embedded controller (EC/KBC) on this motherboard?
A: The embedded controller is a Winbond KBC.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
