Toshiba Satellite L500 Perugia 10M MP 6050A2303001-MB-A3 Schematic
Technical Specifications
Technical Summary
The Inventec Perugia 10M motherboard, document number 1310A2250501 revision A03 dated 2009.05.05, is built around the Penryn CPU platform with a Socket P interface and an ICH9-M southbridge. Graphics are handled by the integrated Cantiga GPU architecture. The system utilizes a WINBOND NPCE781LA0DX EC/KBC and an SPI EEROM for BIOS storage. Audio is provided by a Realtek ALC 272 codec, while networking is managed by a Realtek RTL8103E LAN controller. The charging architecture is a System Charger & VR design centered on the BQ24721C IC, supported by power ICs including TPS51125, TSP51117, APL5930, G2997 F6UD, and TI_51620. Memory configuration consists of two DDR2 SODIMM slots. The board features a PTN3360A HDMI level shifter, a RICOH_R5C804 card reader, and an SLG8SP510 USB hub controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses a WINBOND NPCE781LA0DX EC/KBC.
Q: What is the charging IC and architecture?
A: The charging IC is a BQ24721C, part of a System Charger & VR architecture.
Q: What audio codec is present?
A: The audio codec is a Realtek ALC 272.
Q: What is the LAN controller?
A: The LAN controller is a Realtek RTL8103E.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | INVENTEC |
| Model | Perugia 10M |
| Motherboard Manufacturer | INVENTEC |
| Project Code | Perugia10M |
| Board Number | 1310A2250501 |
| Revision | A03 |
| Date | 2009.05.05 |
| Document Number | 1310A2250501 |
| CPU Platform | Penryn |
| CPU Socket | Socket P |
| PCH / Southbridge | ICH9-M |
| GPU Type | Cantiga |
| Graphics Architecture | Cantiga |
| EC / KBC | NPCE781LA0DX |
| EC/KBC Manufacturer | WINBOND |
| Audio Codec | ALC 272 |
| BIOS / SPI Flash | SPI EEROM |
| Charging IC | BQ24721C |
| Charger Architecture | System Charger & VR |
| Power IC(s) | TPS51125, TSP51117, APL5930, G2997 F6UD, TI_51620 |
| RAM Type | DDR II |
| RAM Architecture | DDR2 Interface |
| RAM Quantity / Slots | DDR2 DIMM0, DDR2 DIMM1 |
| LAN IC | RTL8103E |
| WiFi / WLAN IC | Wireless LAN |
| HDMI Level Shifter | PTN3360A |
| Card Reader IC | RICOH_R5C804 |
| USB Hub IC | SLG8SP510 |
| Thermal Sensor | G2997 F6UD |
Technical Summary
The Inventec Perugia 10M motherboard, document number 1310A2250501 revision A03 dated 2009.05.05, is built around the Penryn CPU platform with a Socket P interface and an ICH9-M southbridge. Graphics are handled by the integrated Cantiga GPU architecture. The system utilizes a WINBOND NPCE781LA0DX EC/KBC and an SPI EEROM for BIOS storage. Audio is provided by a Realtek ALC 272 codec, while networking is managed by a Realtek RTL8103E LAN controller. The charging architecture is a System Charger & VR design centered on the BQ24721C IC, supported by power ICs including TPS51125, TSP51117, APL5930, G2997 F6UD, and TI_51620. Memory configuration consists of two DDR2 SODIMM slots. The board features a PTN3360A HDMI level shifter, a RICOH_R5C804 card reader, and an SLG8SP510 USB hub controller.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The motherboard uses a WINBOND NPCE781LA0DX EC/KBC.
Q: What is the charging IC and architecture?
A: The charging IC is a BQ24721C, part of a System Charger & VR architecture.
Q: What audio codec is present?
A: The audio codec is a Realtek ALC 272.
Q: What is the LAN controller?
A: The LAN controller is a Realtek RTL8103E.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited by a moderator:
