toshiba satellite pro s300 fg6in1 rev 0.0 tecra a10 s10 p10
Technical Specifications
Technical Summary
This Toshiba motherboard schematic, drawing number 5T03655-2 dated 2008.05.05, is built around the Cantiga (G)MCH CPU platform paired with the ICH9M southbridge. The board supports four DDR2 SO-DIMM modules across Channel A and Channel B. Graphics interface is handled through GFX I/F with CRT RGB output and LVDS jumper configuration. The system includes an EC/KBC controller, a FLASH ROM for BIOS, and an Ethernet PHY for LAN connectivity. Wireless connectivity is provided via WLAN/WiMAX and PCI-E Mini Card slots, with additional support for 3G/ROBSON modules. Storage interfaces include SATA HDD, SATA ODD, and eSATA/USB. The board features a dedicated charging IC, IMVP-6+ power management, thermal sensor, TPM controller, Super I/O, Smart Card Reader, ExpressCard slot, docking interface, accelerometer, Bluetooth, FireWire (1394), and a webcam interface. Multiple USB charger controllers are present for dedicated USB power management.
Technician FAQ
Q: What is the drawing number for this Toshiba motherboard?
A: The drawing number is 5T03655-2.
Q: What CPU platform and southbridge does this board use?
A: The board uses the Cantiga (
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | TOSHIBA |
| Motherboard Manufacturer | TOSHIBA CORPORATION |
| Drawing Number | 5T03655-2 |
| Date | 2008.05.05 |
| CPU Platform | CANTIGA (G)MCH |
| PCH / Southbridge | ICH9M |
| EC / KBC | EC/KBC |
| RAM Type | DDR2 SO-DIMM |
| RAM Architecture | Ch.A, Ch.B |
| RAM Quantity / Slots | 4 |
| LAN IC | Ethernet PHY |
| WiFi / WLAN IC | WLAN／WiMAX |
| Card Reader IC | CARD CONT |
| Charging IC | CHARGE |
| Power IC(s) | IMVP-6+ POWER OK |
| Thermal Sensor | THERMAL SENSOR |
| Super I/O | SUPER I/O |
| TPM | TPM CONT |
| Audio Codec | MDC Device Lock |
| USB Hub IC | USB CHARGER |
| HDMI Level Shifter | CRT RGB |
| GPU Type | GFX I/F |
| Storage Controller | SATA HDD I/F, SATA ODD I/F, eSATA/USB I/F |
| BIOS / SPI Flash | FLASH ROM |
| EC Flash / ROM | EC/KBC |
| Wireless Module | PCI-E MINI CARD, PCI-E MINI(3G/ROBSON) |
| Card Reader | Smart Card Reader |
| Docking Interface | DOCKING I/F |
| ExpressCard | EXPRESSCARD |
| Accelerometer | ACCELEROMETER (FRONT) |
| Bluetooth | Bluetooth2 I/F |
| FireWire | 1394 I/F |
| LVDS | LVDS Jumper |
| Webcam | WebCam I/F |
Technical Summary
This Toshiba motherboard schematic, drawing number 5T03655-2 dated 2008.05.05, is built around the Cantiga (G)MCH CPU platform paired with the ICH9M southbridge. The board supports four DDR2 SO-DIMM modules across Channel A and Channel B. Graphics interface is handled through GFX I/F with CRT RGB output and LVDS jumper configuration. The system includes an EC/KBC controller, a FLASH ROM for BIOS, and an Ethernet PHY for LAN connectivity. Wireless connectivity is provided via WLAN/WiMAX and PCI-E Mini Card slots, with additional support for 3G/ROBSON modules. Storage interfaces include SATA HDD, SATA ODD, and eSATA/USB. The board features a dedicated charging IC, IMVP-6+ power management, thermal sensor, TPM controller, Super I/O, Smart Card Reader, ExpressCard slot, docking interface, accelerometer, Bluetooth, FireWire (1394), and a webcam interface. Multiple USB charger controllers are present for dedicated USB power management.
Technician FAQ
Q: What is the drawing number for this Toshiba motherboard?
A: The drawing number is 5T03655-2.
Q: What CPU platform and southbridge does this board use?
A: The board uses the Cantiga (
Attachments
Last edited:
