dell alienware m18x la-8321p rev 0.3
Technical Specifications
Technical Summary
This Dell Avenger MLK motherboard, manufactured by Compal Electronics under project code QBR10, is built around an Intel Ivy Bridge processor in an rPGA 989 socket paired with the Intel Panther Point-M PCH. The board number is LA-8321P, revision 0.1, dated January 17, 2012. Graphics are handled by a dual MXM III configuration supporting discrete GPU modules. System memory consists of four 204-pin DDRIII SO-DIMM slots operating in dual-channel mode at up to 1600/1333 MHz. The embedded controller is an ENE KB930, and the audio codec is designated Malcolm. The BIOS is stored on a SPI ROM. Connectivity includes an Atheros AR8151 Gigabit LAN controller, a Realtek RTS5209 card reader, and an STDP6038 HDMI to LVDS switch. The charging subsystem is managed by the LS-6571P controller.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8321P, and the project code is QBR10.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB930.
Q: What is the graphics architecture of this motherboard?
A: The graphics architecture is MXM III, supporting dual discrete GPU modules.
Q: What type of memory does this motherboard support?
A: It supports dual-channel DDRIII memory via four 204-pin SO-DIMM slots at 1600/1333 MHz.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Dell |
| Model | Avenger MLK |
| Motherboard Manufacturer | Compal Electronics, Inc. |
| Project Code | QBR10 |
| Board Number | LA-8321P |
| Revision | 0.1 |
| Date | Tuesday, January 17, 2012 |
| CPU Platform | Ivy Bridge |
| CPU Socket | rPGA 989 Socket |
| PCH / Southbridge | Intel Panther Point-M |
| GPU Type | MXM x2 |
| Graphics Architecture | MXM III |
| EC / KBC | ENE KB930 |
| Audio Codec | Malcolm |
| BIOS / SPI Flash | SPI ROM |
| Charging IC | LS-6571P |
| RAM Type | DDRIII |
| RAM Architecture | Dual Channel |
| RAM Quantity / Slots | 204pin DDRIII SO-DIMM x4 |
| Card Reader IC | RTS5209 |
| LAN IC | AR8151 |
| WiFi / WLAN IC | WLAN (Half) |
| HDMI Level Shifter | STDP6038 |
Technical Summary
This Dell Avenger MLK motherboard, manufactured by Compal Electronics under project code QBR10, is built around an Intel Ivy Bridge processor in an rPGA 989 socket paired with the Intel Panther Point-M PCH. The board number is LA-8321P, revision 0.1, dated January 17, 2012. Graphics are handled by a dual MXM III configuration supporting discrete GPU modules. System memory consists of four 204-pin DDRIII SO-DIMM slots operating in dual-channel mode at up to 1600/1333 MHz. The embedded controller is an ENE KB930, and the audio codec is designated Malcolm. The BIOS is stored on a SPI ROM. Connectivity includes an Atheros AR8151 Gigabit LAN controller, a Realtek RTS5209 card reader, and an STDP6038 HDMI to LVDS switch. The charging subsystem is managed by the LS-6571P controller.
Technician FAQ
Q: What is the board number and project code for this motherboard?
A: The board number is LA-8321P, and the project code is QBR10.
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is an ENE KB930.
Q: What is the graphics architecture of this motherboard?
A: The graphics architecture is MXM III, supporting dual discrete GPU modules.
Q: What type of memory does this motherboard support?
A: It supports dual-channel DDRIII memory via four 204-pin SO-DIMM slots at 1600/1333 MHz.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Attachments
Last edited:
