Schematic otherbrand quanta sw1 rev1a schematic

Admin

Founder
Staff member
Admin

Reputation:

otherbrand quanta sw1_rev1a schematic

otherbrand=1=quanta sw1_rev1a.pdf




Technical Specifications

ParameterValue
BrandQuanta Computer Inc.
Project CodeSW1
Board NumberUBM1
Revision1A
DateWednesday, November 16, 2005
CPU PlatformYonah
PCH / SouthbridgeICH7-M
GPU TypeCalistoga
Graphics ArchitectureIntegrated GFX
EC / KBCMEC5004
Audio CodecSTAC9200
LAN ICBCM5752
RAM TypeDDR2-SODIMM
RAM Quantity / Slots2
RAM Architecture533/667 MHz DDR II
Charging ICBattery Selector & Charger
Charger ArchitectureAC/BATT
Card Reader ICPCI7402
WiFi / WLAN ICWLAN & WWAN
HDMI Level ShifterCH7307

Technical Summary

The Quanta SW1 motherboard, revision 1A, dated November 16, 2005, is built around the Yonah CPU platform with a Calistoga integrated graphics solution. The platform is supported by an ICH7-M southbridge and utilizes DDR2-SODIMM memory across two slots, operating at 533/667 MHz. System management is handled by an MEC5004 EC/KBC, while audio is provided by a STAC9200 codec. Networking is managed by a BCM5752 LAN IC, and a CH7307 HDMI level shifter is present for video output. The charging architecture is AC/BATT with a dedicated battery selector and charger IC. A PCI7402 card reader controller is also integrated into the design.

Technician FAQ

Q: What EC/KBC is used on this motherboard?

A: The Quanta SW1 uses the MEC5004 EC/KBC.

Q: What is the memory architecture of this motherboard?

A: The motherboard supports DDR2-SODIMM memory across two slots, operating at 533/667 MHz.

Q: What audio codec is used on this motherboard?

A: The audio codec is the STAC9200.

Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
 

Attachments

  • otherbrand=1=quanta sw1_Rev1A.zip
    1.1 MB · Views: 4
Last edited:
Who is viewing this thread?

There are currently 0 members watching this topic

Users who has read this topic
Top