toshiba satellite a505 cs10mg 6050a2303201 mb x01
Technical Specifications
Technical Summary
The Inventec Chelsea 10MG motherboard, documented under project codes CSA3701, CSA3702, and CSA3703 with board numbers 570A3CS, 470A3CS, and 670A3CS, is a Socket P platform supporting Penryn processors in a uFCPGA package with the Cantiga chipset and ICH9-M southbridge. The system memory architecture includes both DDR2 and DDR3 interfaces across two SODIMM slots. Graphics are handled via an MXM module. The embedded controller is a Winbond WPCE781x, and the BIOS is stored on a Winbond SPI EEROM. Audio is provided by a Realtek ALC272 codec. Networking is managed by Realtek RTL8111D and RTL8103E LAN controllers. The charging subsystem is built around a TI BQ24721C, with system power managed by TPS51117, TPS51125, TPS51620, APL5930, and AM4825P regulators. A Ricoh R5U230 and Realtek 5-in-1 controller handle card reader duties, while clock generation is provided by an ICS9LPRS397.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond WPCE781x.
Q: What BIOS flash type is used?
A: The BIOS is stored on a Winbrand SPI EEROM.
Q: What charging IC is used?
A: The charging IC is a TI BQ24721C in a QFN-32 package.
Q: What memory types does this platform support?
A: The platform supports both DDR2 and DDR3 memory via two SODIMM slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Inventec |
| Model | Chelsea 10MG |
| Motherboard Manufacturer | Inventec |
| Project Code | CSA3701 / CSA3702 / CSA3703 |
| Board Number | 570A3CS / 470A3CS / 670A3CS |
| Revision | REV |
| Date | 2009.06.10 / 23-Dec-2008 / 18-Feb-2009 / 14-Feb-2009 / 25-Oct-2008 |
| CPU Platform | Socket P / Penryn / Cantiga / uFCPGA |
| PCH / Southbridge | ICH9-M |
| EC / KBC | WPCE781x |
| Audio Codec | ALC 272 |
| BIOS / SPI Flash | SPI EEROM / WINBOND |
| Charging IC | TI_BQ24721C_QFN_32 |
| Power IC(s) | TPS51117 / TPS51125 / TPS51620 / APL5930 / AM4825P |
| RAM Type | DDR3 / DDR2 / DDR II _SODIMM0 / DDR II _SODIMM1 |
| RAM Architecture | DDR2 Interface / DDR3 Interface |
| RAM Quantity / Slots | DDR2 DIMM0 / DDR2 DIMM1 |
| LAN IC | RTL8111D / RTL8103E |
| Card Reader IC | RICOH_R5U230 / Realtek 5 in 1 |
| USB Hub IC | ICS9LPRS397 |
| GPU Type | MXM |
| Graphics Architecture | Cantiga-4 / Cantiga-5 / Cantiga-6 / Cantiga-7 / Cantiga-2 / Cantiga-3 / Cantiga-1 |
Technical Summary
The Inventec Chelsea 10MG motherboard, documented under project codes CSA3701, CSA3702, and CSA3703 with board numbers 570A3CS, 470A3CS, and 670A3CS, is a Socket P platform supporting Penryn processors in a uFCPGA package with the Cantiga chipset and ICH9-M southbridge. The system memory architecture includes both DDR2 and DDR3 interfaces across two SODIMM slots. Graphics are handled via an MXM module. The embedded controller is a Winbond WPCE781x, and the BIOS is stored on a Winbond SPI EEROM. Audio is provided by a Realtek ALC272 codec. Networking is managed by Realtek RTL8111D and RTL8103E LAN controllers. The charging subsystem is built around a TI BQ24721C, with system power managed by TPS51117, TPS51125, TPS51620, APL5930, and AM4825P regulators. A Ricoh R5U230 and Realtek 5-in-1 controller handle card reader duties, while clock generation is provided by an ICS9LPRS397.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond WPCE781x.
Q: What BIOS flash type is used?
A: The BIOS is stored on a Winbrand SPI EEROM.
Q: What charging IC is used?
A: The charging IC is a TI BQ24721C in a QFN-32 package.
Q: What memory types does this platform support?
A: The platform supports both DDR2 and DDR3 memory via two SODIMM slots.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Attachments
Last edited:
